NOTE: All PSI products purchased from this website will have shipping charges added to the price you pay for the product. These rates are calculated by various warehouses that have the product closer to you to save money.
Poison Spyder Ricochet Rockers™ are built with the same hardcore toughness as its counterpart the Rocker Knocker™, with the added utility of a combination 5" step and slider. This rocker protection is the pinnacle of hardcore body armor protection, style and convenience. The Ricochet Rocker™ is available for Jeep TJ, Unlimited, YJ, CJ7 and CJ8.
Ricochet Rocker™ protection can be used alone or in combination with Crusher Corners™. The two body armor pieces fit together at the rear flare area. Used together, Ricochet Rockers' and Crusher Corners™ form the ultimate protection, guarding your Jeep's body from the front wheel well to the tailgate. Ricochet Rockers™ are secured with counter sunk 3/8" stainless hardware, supplied in the kit with detailed installation instructions.
Ricochet Rockers™ have a distinguishing 5" dimpled plate that acts as a step and a stout reinforcement for the slider. This makes the Ricochet Rocker™ protection a very effective armor addition and an effective pivot for getting into your rock chariot. Jeep TJ,YJ and CJ7 have three dimples, Unlimited and CJ8 have four. With the dimple protrusions pointing upward, they give the extra benefit of increased foot traction when entering or exiting the vehicle, even with boots covered with snow or mud
Ricochet Rockers™ are further reinforced with additional bracing below the dimpled step. The dual tube support and slider bar is constructed of 1.5" DOM tubing, the step and corner gussets are CNC laser cut from steel plate, and brake-formed to act as their own gusset for strength and a clean appearance. Everything is professionally welded and comes to you ready to paint and bolt on.
NOTE: When installing CJ-8 Ricochet Rockers in conjunction with Poison Spyder (or other manufacturers) Tube Fenders with Tube Flares, you will need to trim a few inches of material from the forward edge (trimming is not needed when used with Tube Fenders without Tube Flares). You will want to test-fit and trim BEFORE YOU PAINT OR POWDER COAT.
This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.
For installations in which you would like to protect the paint underneath the Ricochet Rocker™, as well as provide a measure of vibration absorption, we offer an optional Rubber Liner, precisely cut to fit between the Rocker Knocker and the Jeep's body. Be sure to order these separately, as they're not included in the standard Ricochet Rocker™ package.