Unique features include a water heated billet block for quicker warm up times. 3" adapter ring that can be attached to a DIY snorkle. Quick change out part to upgrade to the larger 44 mm carb and Myron's famous 24/7 tech support.

The MY-SIDE kit includes everything except the side draft carb parts.* Used carbs are readily available in the $50 to $70 range on Ebay or your local biker shops. You use the HD 40mm or 44mm CV carb with the OEM choke cable and rubber intake boot The choke and boot are not included but ZOR can provide with kit. Any HD big twin manufactured from 1996 to 2006 came with this carb. The instructions include simple and straightforward "how to" steps to modify the carbs for this application. Modification takes less than 40 minutes.

The picture shows the finished product and parts used in the installation. The kit includes the aluminum water heated billet block, the 48" enrichment cable to modify the short HD choke cable, an accelerator cable stop, bracket, adapters, elbow, filter, hoses and all hardware. Another simple and easy product to install. This set up makes the 1.3 & 1.6 come alive. Rapid acceleration and quick throttle response. Improve mpgs and doesn't stall at angles. This bolt on system does not require removal or your 1.3 style intake manifold.

* Sold as OFF-ROAD ONLY! No claims are being made that the MY-SIDE will pass emissions in any jurisdiction requiring emissions certification!

NOTE: Body lifts where the body is higher off the frame than OEM may require that the installer re-routes/modifies the supplied air filter and connection to the CV carb.