NOT ELIGIBLE FOR USE WITH ANY COUPON
ZOR "SIAMESE TWINS" SAMURAI T-CASE TWIN STICK KIT AND IMPROVED THICKER TWO HOLE BOOT.
This product utilizes a drop and lock design unlike anything seen before. AFTER the center detent ball is removed MY made a super easy to install product that works with both large and small flanges. Simply drop in the steel lock, rotate it under the pins and screw the oil sealing cup in. requires an allen wrench.
The lower dust boot is a two hole boot patterned after a Samurai factory boot. It requires the use of the factory clip to hold it on. The ZOR lower dust boot probably will not work on any other twin stick product.
Lower boot has not been fitting well onto DIY sticks.
WARNING! The Samurai t-case may need to be disassembled if:
- The center detent ball has not previously been removed. Removing enter detent ball may require gasket and seal replacement.
- A rod or fork has been notched
The interior cab boot prototype is pictured above but not in production yet. We have a very good start on the Sidekick/Tracker Siamese Twins with a similar unique "Drop and Lock" feature.
Twin Stick lower dust boot sold separately. Select lower boot and NO THANKS I will make my own sticks to get just the lower boot to close off the front cover from the elements.
ZOR unique drop and lock design.
locked out neutral
more reliable and longer lasting than cutting shift rods for funky H pattern
LIMITED TIME TRADE IN PROGRAM.
Get a $28 ZOR credit good for any product on the website, ZOR company shares, Or redeem for a check. Simply send us your mass produced twin stick product after you install the Siamese sticks and see the difference. No home made twin stick kits accepted. No single stick H pattern kits accepted. Those products need to have the rods and notched fork replaced.
COMING SOON FOR SIDEKICKS/TRACKER/VITARAS