ZOR "MY-TWINS" for SIDEKICK/TRACKER T-CASE TWIN STICK KIT AND DUST/WATER TWO HOLE SEAL TO T-CASE BOOT.
BENEFITS:
2 low driving makes trails more enjoyable!
Less wear and tear on front drive train!
Locked out neutral for safer towing!
Easier to locate gear selection!
IMPORTANT INFO: ZOR manufactured twin sticks DO NOT USE any brass or poly Shifter Sheets
This product utilizes a drop and lock design unlike anything seen before. Center detent ball must be removed by installer to prepare your t-case for using this product. ZOR developed another "do it yourself" product that works. Simply drop in the steel lock, rotate it under the pins and screw the oil sealing cup in with provided allens. Requires an allen wrench to release the lock.
The lower dust boot is a two hole boot patterned after a Sidekick factory boot. It requires the use of the clamp, clip or zip tie to hold it on. The ZOR lower dust boot will NOT work on any other twin stick product. ZOR lower boot has not been fitting well onto DIY sticks. Lower boot part number can be purchased separately.
WARNING! The Sidekick/Tracker t-case may need to be disassembled if:
- The center detent ball has not previously been removed. Removing enter detent ball may require gasket and seal replacement.
The interior cab boot is now available.
